Date: 24/12/2009
By: Chris
Thanks so much. This was just about to drive me nuts each time I got in my truck. Finally did a quick Google search and found your fix. Worked like a charm. Thanks for the info.
Reply
Date: 16/12/2009
By: Brandon
THANK YOU THANK YOU THANK YOU
i came accross you page and wass like well i have tried everything else why not try this in less then 15 min i had it out and taken apart. just like u said and your pic.'s showed it was that one connectin pin that was bad i resoldered it and put it back together it works perfect lol i just cant believe how many miles i have put on my truck since it went out. i was about to order the cluster for $300.00 thanks man it didnt cost me anything. every man should have solder and a solderin gun in his toolbag you never know when you will need it.
Thanks from alabama.
Reply
Date: 25/11/2009
By: Karl
Thank you very much. Iwas very tired of flicking my instrament panel to get it on. Have a great holiday. I did it while I came in for lunch.
Thank you!
Reply
Date: 22/10/2009
By: Doug
Another satisfied "customer". Thanks for the great info. Ben there, Dun that, & it works GREAT!!!
Reply
Date: 16/10/2009
By: RON
Thank you for your help, this is great stuff, you just saved me $500. Aloha from Hawaii
Reply
Date: 15/10/2009
By: Mark
Just wanted to thank you for taking the time to share this fix with everyone. I had to solder the exact same contact as the one in your truck on my 99 Blazer. I had a few more screws to pull the dash apart but once I got in there your instructions were point on. You Rock! Thanks again
Reply
Date: 08/10/2009
By: Jeremy
Thanks for taking the time to find this problem, the fix worked great!!!
Reply
Date: 07/09/2009
By: Alan
Hey Chris,I've been giving this some thought & I've deceided your above average to have figured out the problem plus how to fix it. And for taking the time to show us average Joe's how to fix are's, your a great person! Thanks again.
Reply
Date: 16/09/2009
By: Chris
Haha, above average? Well don't know about that, just like to tinker. But no problem at all, glad I could help.
Reply